Building Disaster Recovery Serviceguard Solutions Using Metrocluster with Continuous Access EVA P6000 for Linux B.01.00.00

Re-enter password of <hostname2/ip_address2>: **********
All the Management Server information has been successfully generated.
NOTE: The desired location is where the modified smiseva.conf file is located.
For more information on configuring the username and password for SMI-S on the management
server, see the HP P6000 Command View Installation Guide.
After the passwords are entered, the configuration is written to the caeva.map map file located
at:
$SGCONF/mccaeva
Setting a default Management Server
Use the smispasswd command to set the active Management Server that will be used by
evadiscovery tool.
For Example:
# smispasswd -d <hostname/ip_address>
The Management Server <hostname/ip_address> is set as the default active
SMI-S.
Displaying the list of Management Servers
Use the smispasswd command to display the current list of storage management servers that are
accessible by the cluster software. Example:
# smispasswd -l
MC/CAEVA Server list:
HOST USERNAME USE_SSL NAMESPACE
----------------------------------------------------------------------
Host1:Port administrator N root/EVA
Host2:Port administrator N root/EVA
Adding or updating Management Server information
To add or update individual Management Server login information to the map file, use the following
command options shown in Table 2:
smispasswd -h <hostname/ip_address> -n <namespace> -p <port> -u
<user_name> -s <y|n>
Table 2 Individual Management Server information
DescriptionCommand Options
This is either a DNS resolvable hostname or IP address of the Management Server-h <hostname/ip_address>
This is the name space configured for the SMI-S CIMOM
1
. The default namespace
is root/EVA.
-n <namespace>
This is the port on which the SMI-S server listens. This attribute is optional and is used
when SMI-S server does not listen on the default ports.
-p <port>
This is the user name used to connect to SMI-S. The user name and password is the
same as those used with the sssu tool.
-u <user_name>
This option specifies the type of connection needed to be established between
Metrocluster software and the SMI-S CIMOM.
-s <y|n>
This option allows secure connection to Management Server using the HTTPS protocol
(HTTP using Secure Socket Layer encryption).
“y”
This option means a secure connection is not required.“n”
Setting up the replication 15