HP StorageWorks 2300 Modular Smart Array reference guide (500911-001, January 2009)

34 Viewing system status
Disk properties
When you select the Disks component, two tables appear. The Disk Sets table shows:
Total Space. Total storage space in the vdisk.
Type. For RAID 10 or RAID 50, the sub-vdisk that the disk is in; for other RAID levels, the disk's RAID
level; or spare.
Disk Type. SAS (dual port), SAS-S (single port), SATA (dual port), or SATA-S (single port).
Disks.
Size.
The Enclosure Front View table has two tabs. The Tabular tab shows:
Health. Shows whether the disk is healthy or has a problem.
OK. The disk is operating normally.
Fault. The disk has failed.
Degraded. The disk's operation is degraded.
Unknown.
Name. System-defined disk name using the format Disk-enclosure-number.disk-slot-number.
Type. SAS (dual port), SAS-S (single port), SATA (dual port), or SATA-S (single port).
State. Shows how the disk is used:
•AVAIL: Available
GLOBAL SP: Global spare
•LEFTOVR: Leftover
VDISK: Used in a vdisk
VDISK SP: Spare assigned to a vdisk
Also shows any job running on the disk:
DRSC: The disk is being scrubbed
EXPD: The vdisk is being expanded
INIT: The vdisk is being initialized
LOWF: A low-level format is in progress
RCON: The vdisk is being reconstructed
VRFY: The vdisk is being verified
VRSC: The vdisk is being scrubbed
Size.
Enclosure. Enclosure name.
Serial Number. Disk serial number.
Status. Up (operational) or Not Present.
The Graphical tab shows the locations of the vdisk's disks in system enclosures and each disk’s Health and
State.
Volume properties
When you select the Volumes component, the Volumes table shows:
The volume’s name, serial number, and size
The name of the vdisk containing the volume
Snap-pool properties
When you select the Snap Pools component, the Snap Pools table shows:
The snap pool's name, serial number, size, and free space
The quantity of master volumes and snapshots associated with the snap pool
The name of the vdisk containing the snap pool