HP-UX Multimedia Streaming Protocols (MSP) Release Notes

the necessary files on your system automatically. For more information about the
swinstall command, see swinstall(1).
Installation Instructions
To install MSP on the HP-UX 11i v1 or HP-UX 11i v2 operating system, complete the
following steps:
1. Review “Prerequisites” (page 13) to ensure your system meets MSP installation
requirements.
2. To download the MSP software, complete the following steps:
a. Go to the HP Software Depot at:
http://www.software.hp.com.
b. Search for “MSP” and read the “Overview” and “Installation” pages for MSP.
c. Select the Receive for Free >> option at the bottom right of the Overview
page.
d. Choose the MSP release for the HP-UX 11i v1 or HP-UX 11i v2 operating
system.
e. Enter your registration information, and read and accept the Terms and
Conditions statements.
f. Select Download at the bottom of the page and save the MSP depot to a local
file on your system, for example, /tmp/MSP.depot.
3. Use the following swinstall command to install the MSP depot on your system:
# swinstall -s <destination path>
where:
<destination path> specifies the absolute path of MSP depot on your system.
NOTE: The swinstall command installs the library files and header files in
the /usr/lib and /usr/inlude directories, respectively.
Installing the rtp and rtcp Kernel Modules
MSP contains the following Dynamically Loadable Kernel Modules (DLKM):
• rtp
• rtcp
The modules rtp and rtcp are automatically loaded after installing the MSP software.
These modules are also loaded when you reboot your system after installing the MSP
software.
If you wish to remove these modules and load them later, you can reload these modules
manually using the kmadmin or the kcmodule command. You can also use the kmadmin
or the kcmodule command to unload and query the status of these modules.
14 HP-UX Multimedia Streaming Protocols (MSP) Release Notes