NetWare Client for DOS and MS Windows User Guide

5-5
Installing or Upgrading NetWare Client Software
Running the NetWare Client Installation Program
For more detailed information, continue with this section, which explains
the following installation tasks:
• Selecting a Destination Directory for the NetWare Client Files
• Updating System Files on Your Workstation
• Installing Support for MS Windows
• Installing LAN Drivers
• Copying Files
NOTE: Take advantage of the useful hints about the installation program that are provided at
the bottom of the screen.
Procedure
1 Follow the appropriate set of steps to load the installation program:
The following figure shows an example of the opening screen in the installation
program.
Installing from Diskettes Installing from a Network Directory
1 Insert NetWare Client for DOS and MS
Windows Disk 1 into a disk drive.
2 Change to the letter of the floppy drive
that contains the diskette.
For example, type
A: <Enter>
3 Type
INSTALL <Enter>
4 Follow the instructions on your screen.
1 From the SYS:PUBLIC directory, change to the
CLIENT\DOSWIN subdirectory.
For example, type
CD CLIENT\DOSWIN <Enter>
2 Type
INSTALL <Enter>
3 Follow the instructions on your screen.