NetWare Client for DOS and MS Windows User Guide

5-31

Installing or Upgrading NetWare Client Software

Using Two Network Boards

NOTE: Include the line for MS Windows directory only if you are running MS Windows for

Workgroup.

Replace preferred_language with one of the following languages:

ENGLISH

DEUTSCH

ESPANOL

FRANCAIS

ITALIANO

Replace client directory with the directory where the NetWare Client ﬁles

are found.

Replace primary_lan_driver with name of the ODI LAN driver that your

workstation binds to ﬁrst.

Replace secondary_lan_driver with name of the ODI LAN driver that your

workstation binds to second.

Replace MS Windows directory with the directory where the MS Windows

for Workgroup ﬁles are found.

NET.CFG

Two Different Drivers

If you have two network boards using different types of ODI LAN drivers,

you must load the LAN drivers separately by adding a Link Driver section

for each network board.

For example, if you have and NE2000 network board (the primary board)

and a token ring network board, you might include the following lines in the

NET.CFG ﬁle:

link driver ne2000

int 5

port 360

frame ethernet_802.2

frame ethernet_802.3