FTAM/9000 Reference Manual

16 Chapter 1
FTAM return_codes
inout_dcb->result.return_code
MESSAGE FTE004_BUFFER_OVERFLOW
CAUSE The inout_dcb specified is not large enough to hold the
output of the call.
ACTION You have two options:
• Call the function with the address of a NULL
inout_dcb, thus requesting the interface to
dynamically allocate the output area.
• Call the function with a larger buffer.
MESSAGE FTE005_INV_CONN_ID
CAUSE The connection_id from ft_connect() is no longer active
or ft_connect() did not return the connection_id.
ACTION Call the function with a valid, active connection_id
returned from an ft_connect() request.
MESSAGE FTE006_NETWORK_UNAVAIL
CAUSE All contact with ftam_init was lost either because it
was killed or exited.
ACTION Call ft_aeactivation() to activate another ftam_init. If
the error still occurs, terminate the application and
refer to the OSI Troubleshooting Guide.
MESSAGE FTE007_NO_REQ_RESOURCES
CAUSE Current resources are insufficient to honor the request;
virtual memory is exhausted.
ACTION Check your memory management. Free any unused
resources (e.g., memory), call ft_dfdcb() to free DCBs
that are no longer needed, and call the function again.