HP Process Resource Manager User's Guide

Command reference
prmmove
Appendix A222
Differences in output from prmmonitor and top
The prmmonitor output shows the MRG for a process, while the top
output shows the PRM group for the process. Typically, the MRG and
PRM group for a process match. However, the values may differ
temporarily when a process is first moved to a new PRM group.
prmmove
Syntax:
prmmove -V
prmmove [-w]
prmmove [targetgrp | -i ][-p PID ... ][-g pgid ... ]
[-u login ... ]
Availability: Any user can run the prmmove command.
The prmmove command lets you dynamically move one or more processes
between PRM groups. It also lists the process groups you can access.
Processes to be moved can be specified by process ID, process group ID,
or user login name.
interval Specifies the length in seconds of the sample interval.
The HP-UX memory manager typically samples
memory data every 10 seconds, so if you specify an
interval value less than 10 seconds, the same memory
statistics may be repeated in sequential displays.
iterations Specifies the number of samples to take; if iterations
is not specified, prmmonitor continues until
terminated with a CTRL-C.
Table A-8 prmmonitor user options/parameters (Continued)
Option/
parameter
Description