HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.01 User Guide

Command line 95
Item Description
Sets the order for the network privilege to be TACACS+, followed by RADIUS
->set role server Order=ldap,radius,tacacs
Sets the order for the server privilege to be LDAP, followed by RADIUS, followed
by TACACS+
->set role network operations=SupportFiles,PortMonitoring
Sets the network role operation permissions to "SupportFiles" and
"PortMonitoring"
->set role server operations=*
Sets the server role operation permissions to all operations enabled
->set role server operations=
Sets the storage role operation permissions to all operations disabled
->set role domain operations=Default
Sets the domain role operation permissions back to factory default
Item Description
show role
Display the current authentication order and operation permissions for a VC role.
Syntax
show role [<RoleName>|*]
Parameter
RoleName (optional)
The name of a VC role for which the existing authentication order is to be
displayed. Valid values are "domain", "server", "network", and "storage". Use
"*" to display detailed information for all user roles. If not specified, a summary
of all roles appears.
Examples
->show role
Displays a summary authentication order of all user roles
->show role domain
Displays the authentication order for the domain user role
->show role *
Displays the authentication order for all user roles
server
Manage server blades.
Supported actions: help, poweroff, poweron, reboot, show
Item Description
poweroff server
Power off one or more physical servers.
Syntax
poweroff server <ServerID|*> [-Force|-ForceOnTimeout]
[-timeout=<timeout>]
Parameter
ServerID (required)
The ID of a physical server in the domain. The format of the server ID is
<EnclosureID:DeviceBay>. If the EnclosureID is not specified, the local
enclosure is used by default. Use "*" to power off all servers in the domain. For a
multi-blade server, the ServerID must be that of the monarch bay. This is the ID
displayed by the
show server
command.
Options
Force
Forces a power off operation without waiting for the operating system to shut down
gracefully. Only use this option as a last resort, because it can cause potential data
loss on the server.