Hitachi Dynamic Link Manager Software Users Guide for Linux

Figure 3-15 Example of Editing the /etc/lvm/lvm.conf File
4. Create the physical volumes.
The following example shows how to define /dev/sddlmad1 and /dev/
sddlmad2 as physical volumes:
# pvcreate /dev/sddlmad1
Physical volume "/dev/sddlmad1" successfully created
# pvcreate /dev/sddlmad2
Physical volume "/dev/sddlmad2" successfully created
5. Create a volume group.
In the following example, the command creates the vg01 volume group
by using the physical volumes /dev/sddlmad1 and /dev/sddlmad2:
# vgcreate vg01 /dev/sddlmad1 /dev/sddlmad2
Volume group "vg01" successfully created
Creating an HDLM Environment
3-175
Hitachi Dynamic Link Manager (for Linux®) User Guide