Hitachi Dynamic Link Manager Software Users Guide for Linux

Specify the position of the valid title for default.
¢
When ELILO is the boot loader
Specify label for default.
38. Shut down the host.
Execute the following command to shut down the host:
# shutdown -h now
39. Change the configuration from a single-path configuration to a multi-path
configuration.
40. Start the host.
41. Execute the mount command to make sure that the HDLM device is
mounted on /boot.
The following shows an execution example for when GRUB is used as the
boot loader:
# mount
:
:
/dev/sddlmaa1 on /boot type ext3 (rw)
:
:
Check the underlined section.
42. Update the information about the volume group.
Execute the following command to update the information about the
volume group.
# vgscan
Reading all physical volumes. This may take a while...
Found volume group "VolGroup00" using metadata type lvm2
43. Check the relationship between the volume group and HDLM devices.
Execute the following command to make sure that the physical volumes
that make up the volume group are HDLM devices.
HDLM Operation
4-33
Hitachi Dynamic Link Manager (for Linux®) User Guide