HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

DescriptionAttribute
Number of mainframe logical devices to which paths are not assigned
numberOfUnallocated-
MfLDEVs
Product code of the storage system
productCode
Time when the storage system was last refreshed
The number of seconds elapsed from 00:00:00 on January 1, 1970 (world
standard time) is displayed.
lastRefreshed
This item indicates whether an unformatted logical unit can be created.
One of the following values is output for P9500, XP24000/XP20000, or
XP12000/XP10000/SVS200:
• -1: Unknown
• 0: Able to select whether to format a logical unit when it is created
• 1: A logical unit is automatically formatted when it is created
For other storage systems, -1 is output.
autoFormatLU
Indicates whether the target storage system is consistent with the Device Manager
database.
• 0: The Device Manager database is consistent.
• 1: The database is being updated. Wait until the update is done, and then
execute the GetStorageArray command.
• 2: The Device Manager database is inconsistent. Execute the AddStorage-
Array command to update the configuration information of the storage system,
and then execute the GetStorageArray command.
• 3 or 4: The database is being updated in the background. These values are
output only for SMI-S Enabled storage systems. If one of these values is output,
you can use the GetStorageArray command to obtain information.
statusOfDBInconsist-
ency
Indicates whether the actual configuration information of the target storage system
matches the configuration information in the Device Manager database.
One of the following values is output for P9500 and XP24000/XP20000 version
60-04-10-XX/XX or later:
• 0: The configuration information matches.
• 1: The configuration information does not match. Use the AddStorageArray
command to update the configuration information of the storage system.
-1 is output for other storage systems.
configUpdateStatus
Total size of the open logical units and the intermediate logical units that satisfy
both the following conditions (in KB):
• Paths are assigned.
• The logical unit is a real volume that has physical capacity.
Total value of the sizeInKB attributes of the LDEV instances that satisfy all of the
following conditions:
• dpType is not 0.
• path is true.
• snapshotVolumeType of the LogicalUnit instance associated with the
LDEV is not V-VOL.
openAllocatedActual-
Capacity
CLI Reference Guide 351