HP Networking Utilities User Guide

ManualsBrandsHP ManualsSoftwareMicrosoft Windows Server 2008 for Itanium-based Systems

<property id='SpeedDuplex' value='Auto/Auto'/>

<property id='NetworkAddress' value='' />

</nic>

<nic>

<property id='SpeedDuplex' value='Auto/Auto'/>

<property id='NetworkAddress' value='' />

</nic>

<team relnics='2 3'>

<property id='TeamName' value='HP Network Team #1'/>

<property id='OpMode' value='TransmitLoadBalancing'/>

<property id='LoadBalAlgorithm' value='Auto'/>

<property id='RxHeartbeatInterval' value='3'/>

<property id='TxHeartbeatInterval' value='3'/>

<property id='RxHeartbeatMode' value='Enabled'/>

<property id='TxHeartbeatMode' value='Enabled'/>

<property id='TeamNetworkAddress' value='' />

<property id='FastPathEnabled' value='Enabled'/>

<property id='FastPathSpanningTreeType' value='IEEE 802.1D'/>

<property id='EchoNodeTime' value='3'/>

<property id='EchoNodeTimeout' value='3'/>

<property id='CriteriaRanking' value='9;0;1;2'/>

<property id='RouterPathProtocol' value='HSRPv1'/>

<property id='ActivePathEnabled' value='Enabled'/>

<property id='EchoNodeIPAddress' value='192.168.0.2'/>

<property id='EchoNodeResponseMech' value='CommunityAddressARP'/>

<property id='EchoNodeProbeAddress' value='00-01-FA-FE-FE-FE'/>

<property id='EchoNodeProbeIPAddress' value='192.168.0.3'/>

<property id='EchoNodeUseDefMac' value='Yes'/>

<property id='RouterPathEnabled' value='Enabled'/>

<property id='RouterPathIPAddress' value='192.168.0.4'/>

<property id='CDPv1Enabled' value='Enabled'/>

<property id='CDPv2Enabled' value='Disabled'/>

<property id='LLDPEnabled' value='Disabled'/>

<property id='RSSEnabled' value='Disabled'/>

<property id='DefaultVlanId' value='10'/>

<property id='RxPathValidationVlanId' value='10'/>

<property id='FastPathVlanId' value='10'/>

<property id='ActivePathVlanId' value='10'/>

<property id='RouterPathVlanId' value='10'/>

<vlan>

<property id='VlanId' value='10'/>

<property id='VlanName' value='VLAN 10'/>

</vlan>

</team>

<teamingconfig>

Error handling and reporting

Errors can occur for a variety of reasons, including differences between the source and target

system NICs or errors introduced by editing the XML data file. The software performs extensive

error checking as the XML data file is read and processed.

When invalid property values are detected, a WARNING error message is written to the log file

and configuration continues with either default or existing values.

18 Network Adapter Scripting Utility