HP Tru64 UNIX Release Notes for Version 5.1B-5 (AA-RVGEE-TE, March 2009)

# /sbin/init.d/snmpd start
# /sbin/init.d/insightd start
If you did not back up the /sbin/init.d/snmpd file in step 1, you can modify it
after you install Version 5.1B-5 (step 4) and stop the snmpd and insightd daemons
(step 5) as follows (the XXX represents the revision, such as CPQIM370):
1. Edit the line that reads CPQMIBS=/usr/sbin/cpq_mibs as follows:
CPQMIBS=/var/opt/CPQIMXXX/bin/cpq_mibs
2. Edit the line that reads PMGRD=/usr/sbin/pmgrd as follows:
PMGRD=/var/opt/CPQIMXXX/bin/pmgrd
3. Edit the line that reads $PMGRD > /dev/console 2>&1 & as follows:
$PMGRD `$RCMGR get PMGRD_FLAGS` > /dev/console 2>&1 &
3.1.1.2 V5.1B-5 Installation Might Overwrite snmpd File
When you install a newer version of the Insight Management Agents kit, the paths to
the cpq_mibs and pmgrd subagents are changed in the snmpd script. By installing
Version 5.1B-5, the snmpd script is replaced by the original version provided in the
base version of the Insight Management Agents kit.
It is recommended that any existing version of Tru64 UNIX Insight Management Agents
kit (CQPIMxxx kit, where xxx=310, 320, 370, and so on) be uninstalled prior to 5.1B-5
update and CPQIM370 kit with latest available CPQIM370 patches be re-installed after
5.1B-5 update. The CPQIM kit is available at the site:
http://h30097.www3.hp.com/cma/.
The CPQIM patches are available at:
http:// h30097.www3.hp.com/cma/patches.html.
If you do not wish to perform the above mentioned step, the following steps will have
to be performed.
• You must restore the snmpd script to the latest version. To do this, create a backup
file of the snmpd script, and restore the backup version after installing V5.1B-5.
(See step 1 of the workaround described in Some Insight Management Agents Kits
Might Prevent Version 5.1B-5 Installation).
• If you did not back up the snmpd file before installing V5.1B-5, you can modify
the file after the installation, as described in Some Insight Management Agents
Kits Might Prevent Version 5.1B-5 Installation.
3.1.2 Stop sendmail Before Installing Kit
Stop the sendmail mailer daemon before installing this kit. Failing to do so can lead
to the loss of queued mail. Lost mail cannot be recovered.
To stop the daemon, enter the following command:
3.1 Installation Release Notes 25