Command Reference Guide

Examples

274 Platform LSF Command Reference

Prints LSF release version to stderr and exits.

Examples

% lsrtasks + task1 task2/"select[cpu && mem]" - task3

or in restricted form:

% lsrtasks + task1 task2/cpu:mem - task3

Adds the command task1 to the remote task list with no resource requirements,

adds

task2 with the resource requirement cpu:mem, and removes task3 from the

remote task list.

lsrtasks + myjob/swap>=100 && cpu

Adds myjob to the remote tasks list with its resource requirements.

Running

lsrtasks with no arguments displays the resource requirements of tasks

in the remote list, separated from the task name by a slash (/):

% lsrtasks

cc/cpu cfd3d/type == SG1 && cpu compressdir/cpu:mem

f77/cpu verilog/cpu && cadence compress/cpu

dsim/type == any hspice/cpu && cadence nas/swp > 200 && cpu

compress/-:cpu:mem epi/hpux11 sparc regression/cpu

cc/type == local synopsys/swp >150 && cpu

Files

Reads the system task file lsf.task, and the user task file (.lsftask). See

lsf.task(5) for more details.

The system and user task files contain two sections, one for the remote task list, the

other for the local task list. The remote tasks section starts with

Begin

RemoteTasks and ends with End RemoteTasks. Each line in the section is an entry

consisting of a task name.

A plus sign + or a minus sign – can optionally precede each entry. If no + or – is

specified, then + is assumed.