Command Reference Guide

Usage
30 Platform LSF Command Reference
3 LOG_DEBUG3 level for extended logging. A higher level includes lower logging
levels. For example, LOG_DEBUG3 includes LOG_DEBUG2, LOG_DEBUG1, and
LOG_DEBUG levels.
Default: 0 (LOG_DEBUG level in parameter LSF_LOG_MASK)
-f logfile_name
Specify the name of the file into which debugging messages are to be logged. A file
name with or without a full path may be specified.
If a file name without a path is specified, the file is saved in the LSF system log
directory.
The name of the file that is created has the following format:
logfile_name.daemon_name.
log.host_name
On UNIX, if the specified path is not valid, the log file is created in the
/tmp
directory.
On Windows, if the specified path is not valid, no log file is created.
Default: current LSF system log file in the LSF system log file directory.
-o
Turns off temporary debug settings and resets them to the daemon starting state.
The message log level is reset back to the value of LSF_LOG_MASK and classes are
reset to the value of LSB_DEBUG_MBD, LSB_DEBUG_SBD.
The log file is also reset back to the default log file.
host_name ...
Optional. Sets debug settings on the specified host or hosts.
Lists of host names must be separated by spaces and enclosed in quotation marks.
Default: local host (host from which command was submitted)
sbdtime [-l timing_level] [-f logfile_name] [-o] [host_name ...]
Sets the timing level for sbatchd to include additional timing information in log
files. You must be
root or the LSF administrator to use this command.
In MultiCluster, timing levels can only be set for hosts within the same cluster. For
example, you could not set debug or timing levels from a host in clusterA for a host
in clusterB. You need to be on a host in clusterB to set up debug or timing levels for
clusterB hosts.
If the command is used without any options, the following default values are used:
timing_level=no timing information is recorded
logfile_name=current LSF system log file in the LSF system log file directory, in the
format daemon_name.
log.host_name
host_name=local host (host from which command was submitted)
-l timing_level
Specifies detail of timing information that is included in log files. Timing messages
indicate the execution time of functions in the software and are logged in
milliseconds.
Valid values: 1 | 2 | 3 | 4 | 5