Document

Intel® Desktop Boards

Multistreaming Playback for IDT* Audio

Multistreaming allows you to listen to two different audio sources on two different speaker sets.

For example, you can listen to one audio source through the back panel speakers and a second

audio source through front panel headphones or speakers.

Check the Audio Subsystem section of the Product Guide or Technical Product Specification

(TPS) to see if your Intel® Desktop Board supports multistreaming.

This document provides an example of how to set up multistreaming playback with two audio

sources: Windows Media Player* and Winamp*. If you are using different audio software, look for

similar settings that allow you to select front or back panel audio devices.

Updates to the IDT audio drivers may include changes to the user interface, therefore the steps

and screenshots shown here may not exactly match what you see on your system.

Configuration Steps for Multistreaming Playback

1. Open the IDT Audio Control Panel.

2. Go to the Advanced menu. Verify that Multi-streaming is enabled (green light).

PAGE 1
Intel® Desktop Boards Multistreaming Playback for IDT* Audio Multistreaming allows you to listen to two different audio sources on two different speaker sets. For example, you can listen to one audio source through the back panel speakers and a second audio source through front panel headphones or speakers. Check the Audio Subsystem section of the Product Guide or Technical Product Specification (TPS) to see if your Intel® Desktop Board supports multistreaming.
PAGE 2
3. Open Windows Media Player* and click Tools > Options. Go to Devices tab. Select Speakers and click the Properties button. 4.
PAGE 3
5. Click OK and close all Windows Media Player properties. 6. Open Winamp. Click Options > Preferences. 7. Click Output (under Plug-ins). Select Nullsoft DirectSound Output and click the Configure button.
PAGE 4
8. On the Device tab, select your playback location for Winamp:  For playback to back panel audio, choose IDT Audio1  For playback to front panel audio, choose IDT Audio2 Do not choose the same playback location as you did for Windows Media Player. Windows Media Player and Winamp should now playback to separate speaker sets, front and back.