Instruction Manual

Page -8-© Audient Ltd
Automation Setup
Step 6:
Return to the arrange page
and create 8 new mono
“dummy” audio tracks for
ASP2802 automation to
follow and write to.
It is suggested that you
place them at the start of
your session so that the
first HUI
TM
control surface
that drives the automation
is locked in place here, note
the grey bars to the left of
the first 8 track headers.
This allows you to
add a second HUI
TM
surface for the ASP2802
control surface layer.
The following tweak is optional, but
we recommend you de-assign any
input and output track routing so that
you do not inadvertantly record audio
on to automation only tracks, as these
tracks should contain no audio.
For quicker workflow use the Logic
input and output assign boxes in the
create new track dialogue window to
save time (see right).
Use logical track labels so that they are easier to locate, ASP1,
ASP2, ASP3 etc - perhaps with a further addition of whatever
source level you are riding, ASP1-LDVox, ASP3-DrumsL etc.
Automation modes can now be freely set on each of these
channels either via the control surface or in Logic.