Manual

You can scan the QRCode through mobile client which is installed in the mobile
phone or tablet PC to log in the mobile client instantly.
Access Type: NAT1.0 or NAT2.0 can be selected.
Note: if you want to use cloud upgrade, you must enable NAT2.0.
Device Management
98
11.1.8 802.1X
If it is enabled, the DVR data can be protected. When the DVR is connected to
the network protected by the IEEE 802.1X, user authentication is needed.
To use this function, the DVR shall be connected to a switch supporting 802.1x
protocol. The switch can be considered as an authentication system to identify
the device in a local network.
If the DVR connected to the network interface of the switch has passed the
authentication of the switch, it can be accessed via the local network.
Protocol type and EAPOL version: Please use the default settings.
User name and password: The user name and password must be the same with
the user name and password applied for and registered in the authentication
server.