Reference Guide

107
Playing project files
Tutorial 1 – Creating, playing, and saving projects
Playing project files
For this next section we are going to configure the project named SONAR_AudioDemo1.cwb for
playback in SONAR. If you have not opened the project yet, do so before continuing by using the
steps in “Opening project files” on page 105.
Configuring your sound device
Before we can get any sound, we need to ensure that SONAR is communicating with your
computer’s sound card or audio interface. To do so, click on the Edit menu across the top of
SONAR’s screen, choose Preferences, then click Audio - Devices.
Before you can hear any sound play in SONAR, you have to ensure that the devices you want to use
are selected. An Edirol audio interface is used in the following example, so all the Input Drivers and
Output Drivers check boxes for the Edirol device are selected. Your device list will most likely be
different from the following image.
After you have selected the desired Input and Output devices that you plan to use with SONAR, click
the Audio - Driver Settings page. In the Playback Timing Master list, select the audio output