Reference Guide

1119
Assigning instruments
Instrument definitions
To assign instrument definitions to MIDI outputs and channels
1. Go to Edit > Preferences > MIDI - Instruments.
Figure 337. The Instruments section
2. Select one or more MIDI outputs and channels from the Output/Channel list (use SHIFT-click
and CTRL-click to select multiple outputs and channels). You can also drag through a bunch of
channels to select them. For example, if you want to assign the first 16 MIDI channels on output
1 to a certain MIDI module, drag through the first 16 items in the Output/Channel list to select
them.
3. Choose the instrument definition to which the selected outputs and channels should be assigned
from the Uses Instrument list. A black line connects the two lists. If your MIDI module’s name
doesn’t appear in the list and you don’t want to use General MIDI bank and patch names for it,
see “Importing instrument definitions” on page 1121.
4. To save these changes permanently, check the Save Changes for Next Session box.
5. Click OK to apply your changes.
From now on, the bank, patch, controller, and note names from the assigned instrument definition
are used throughout SONAR on any track that uses one of the output/channel combinations you
selected in the Output/Channel list.