Reference Guide

1612 Dialog box reference
Gain dialog
Freeze Tail Duration n seconds
This value allows for a reverb or delay tail (the reverberations or signal delay that continue once the
source has stopped). Set this value at a high enough value to allow for any delay or reverb or other
effect that you may have patched into a track.
Audible bounce
When Fast bounce is disabled, the real-time bounce operation can be performed either silently or
audibly. To hear the bounce operation while freezing a track, select the Audible bounce check box.
Track FX
When selected (default behavior), the track effects bin is rendered into the frozen clip, Freeze Tail
Duration is applied, and the track effects bin is bypassed.
If the Track FX option is not selected, the track effects bin is not rendered into the frozen clip, which
is useful when freezing AudioSnap clips in order to conserve CPU resources.
Gain dialog
The Process > Apply Effect > Gain command opens the Gain dialog box.
This dialog box lets you precisely control the gain, phase, and stereo interleave of selected audio
data. This dialog box has the following controls:
• New Left Channel-From Left slider. Drag the From Left slider to determine the amount of the
original left channel that will be mixed to the new file (range = -INF to 18.0dB).
• New Left Channel-From Right slider. Drag the From Right slider to determine the amount of
the original right channel that will be mixed to the new file (range = -INF to 18.0dB).
• Invert left channel phase. Enable the Invert left-channel phase button if you want to reverse
the phase of the new left-channel mix.
• New Right Channel-From Left slider. Drag the From Left slider to determine the amount of
the original left channel that will be mixed to the new file (range = -INF to 18.0dB).
• New Right Channel-From Right slider. Drag the From Right slider to determine the amount
of the original right channel that will be mixed to the new file (range = -INF to 18.0dB).
• Invert right channel phase. Enable the Invert right-channel phase button if you want to
reverse the phase of the new right-channel mix.
• Audition button. click this button to audition a few seconds of your new settings.
Tip: You can right-click any track’s Freeze button in the Track view to open the Freeze Options
dialog box.
Note: Each group consisting of a slider, a % edit box, and a dB edit box are connected; adjusting
one affects the others.