Reference Guide

1632
Marker dialog
Out Note
The specific note to which the In Note is mapped. The range is from C0 to G10 or 0 to 127. Raise or
lower values one half-step at a time using the +/- keys or by an octave at a time by using the open
and close braked keys ([ and ]).
Vel+
Sets a velocity offset to a mapped drum note. Values range from -127 through 127. Use the +/- keys
to increase or decrease the value.
Vel%
Multiplies the velocity of the note by the percentage you enter. Values range from 10 to 200.
Map Manager button
Opens the Map Manager dialog box.
Out Port
The output port to which the Out Note is sent. You can assign a note to any port selected in the MIDI
Devices dialog box. Also, any soft synths in your project show up as an option. You can use the +/-
keys to scroll up or down in the Output Port list.
Out Chan
Sets the channel in which the mapped drum note plays. You can choose to follow the track’s channel
setting or set the note to a specific channel (1 through 16).
Bank
The bank number on which the mapped note is transmitted.
Patch
Sets the Patch name that the mapped drum note is transmitted to.
Marker dialog
Use the Project > Insert Marker command to open the Marker dialog box.
This dialog box lets you add a “Marker” on page 1915 where you specify in the music.
Name:
Enter the name you want to give the marker.
Lock to SMPTE time
Check this if you want to use SMPTE time code.