Reference Guide

267
Input quantizing
Recording
Input quantizing
Input quantizing allows you to automatically quantize MIDI input during recording. You can see the
results immediately, and hear the results as soon as a track is looped.
You control input quantize settings in the Input Quantize section in the Track Inspector. For details,
see “Input Quantize section” on page 540.
Figure 63. Input Quantize controls are availalbe in the Track Inspector
To turn Input quantizing on or off
Click the track’s Enable/Disable Input button in the Track Inspector.
To set the resolution
Click the track’s Input Quantize resolution control in the Track Inspector, then choose a resolution
from the drop-down menu. You can also click Quantize Settings in the resolution menu to open the
Input Quantize dialog box, and type a number of ticks in the Resolution field.
Note: Input quantizing does not destroy your original recording. If you press CTRL+Z after you
finish recording with input quantizing enabled, the quantized clip is deleted, and the original
unquantized clip appears, just as you recorded it. If you are using loop recording in Sound On
Sound mode, all the quantized clips are deleted.
Note: To quantize to a custom resolution value, open the Input Quantize dialog box, and type
a custom number of ticks in the Resolution field.