Reference Guide

712 Editing MIDI events and continuous controllers (CC)
Selecting and editing events
To insert a single blank measure into a project
1. Press CTRL+SHIFT+A or select Edit > Select > None to make sure that no track or time range
is selected.
2. Set the Now time to the place where you want to insert the measure.
3. Choose Project > Insert Time/Measures to display the Insert Time/Measures dialog box.
Figure 223. The Insert Time/Measures dialog box
4. Verify that the settings are correct and click OK.
SONAR inserts a blank measure at the Now time.
To insert blank time or measures into a project
1. Select Edit > Select > None to make sure that no track or time range is selected.
2. Select the range of time you want to insert by dragging in the Time Ruler.
3. Choose Project > Insert Time/Measures to display the Insert Time/Measures dialog box.
4. If necessary, adjust the time at which blank space will be inserted.
5. If necessary, change the length of time to insert by entering a number and choosing the units you
want from the list.
6. Choose the types of events that should be shifted automatically from the Slide list.
7. Click OK when you are done.
SONAR inserts the desired amount of blank time into the project.
To insert blank time or measures into selected tracks
1. Select the range of time you want to insert by dragging in the Time Ruler.
2. Select one or more tracks by CTRL-clicking on the track numbers.
3. Choose Project > Insert Time/Measures to display the Insert Time/Measures dialog box.
4. If necessary, adjust the time at which blank space will be inserted.