Reference Guide

762 Drum maps and the Drum Grid pane
Creating and editing a drum map
Drum maps used in current project
This field displays all the currently available drum maps. click the New button to create a
new drum map and Delete to delete a drum map. Select a drum map to display the drum
mappings in the Drum Map Manager. All drum maps in this field are saved with the current project.
Presets
Presets can be used to populate the fields in the Drum Map Manager. This field is also used to save
new drum maps by entering a name in the field and clicking the Save button.
Settings
The Settings section is where you map the following for each In Note (source):
• In Note. The source MIDI note value.
• Out Note. The MIDI note value that plays on the destination sound source.
• Name. The user-defined name for the row.
• Chn. The channel on which the note is transmitted.
• Out Port. The hardware output port or software virtual output port to which you are sending the
note.
• Vel+. Apply a velocity offset setting to an individual mapped pitch.
• V Scale. The V Scale value sets a level of compression or expansion. A value below 100% is
compression. A value above 100% is expansion. The Vel+ setting allows for gain make-up.
Ports and channels
This section lists each unique Port and Channel pairing. This allows you to make quick global
changes that Port and Channel pairing’s Bank and Patch settings.
See:
“Working in the Drum Map Manager” on page 762
Working in the Drum Map Manager
The following table lists several ways of editing settings in the Drum Map Manager.
To do this Do this
Audition a row Select the row and press SHIFT+SPACEBAR
Sort rows Drag and drop a row to a new location
Select multiple rows Click a row, hold down the CTRL key while selecting additional rows
Table 147.