Installation Guide
5
Bistro Table Set
LTR50001200, Rev. A
www.calamebbq.com
Steel Framework and Stools
1. Clean
Thoroughly clean stains, food, and grime using a sponge or damp
cloth with warm water and a mild dish soap. Use Fantastik or For-
mula 409 to remove heavier soil.
2. Rinse
Thoroughly rinse all surfaces and dry them completely with a clean
towel. Do not allow steel to air dry.
3. Polish
We strongly recommend that you apply a surface protectant to all
exposed steel surfaces.
Spray a small amount of WD-40 or Sheila Shine on a piece of paper
towel and rub with the grain over the surface. Using a clean terry cloth
or paper towel, polish the surface by rubbing with the grain until excess
liquid is removed and the surface shines. It should not be oily to the
touch, however some residue is acceptable.
Some people have reported that using lemon oil products such as Old
English furniture polish is effective for polishing stainless steel and pro-
tecting the surface.
Fire
Hazard
Caution
NEVER spray WD-40 or Sheila Shine near an open ame!
These products are extremely ammable while in their
aerosol forms.
Do not use WD-40 or Sheila Shine near food or on food
preparation surfaces as it is a health hazard.