Install Guide
Preparing your hub
The hub will now securely link to our servers; this may take a minute or two, however
once this has occurred the screen will advance.
8
Power up your devices
The hub is now connected; you now need to power up your other devices. For
installation it is best to have these devices placed within two metres of the AlertMe
hub, they can be moved away later.
When you have done this click “Submit”.
9
Please note! The Keyfob LEDs will light up solid green, before starting to ash.
When the CT-30 starts for the rst time it will enter a search mode automatically
and this can be conrmed by seeing the radio waves blink from the radio mask icon
on the Thermostat.
Finding your devices
The devices should now begin to appear on the screen. You should see one icon for
each device added.
Please note! When the Keyfob LED stops
ashing it means the device has been
found by the hub.
When the Thermostat has been found
you will see the word “LINK” displayed
on the CT-30 display panel.
These deviceswill then appear on your screen.
Once all your devices have appeared click “Continue”.
10
89
10