Manual Part 6

6. Windows NT 4.0

6.1 Driver installation and TCP/IP Setup

Windows NT 4.0 does not support Plug-and-plug. Therefore, the 802.11a NDIS driver installation

uses an approach that is different from the installation used in other Operating Systems. In order

to install 802.11a Wireless LAN Network Adapter in Windows NT 4.0, a PC Card utility called

CardWizard is used. If your computer system does not have CardWizard utility pre-loaded then

you can purchase it from SystemSoft Corporation (www.svstemsoft.com) or you can download a

14-day evaluation copy from ftp://www.systemsoft.com/pub/Wn51tren.exe. Note that CardWizard

requires Windows NT 4.0 Build 1381 (Service Pack 6) installed in order to function correctly.

Please install Service Pack 6 if your Windows NT 4.0 is not updated

After CardWizard utility is loaded, insert the 802.11a Wireless LAN Network Adapter into a 32-bit

CardBus slot, and follow these steps to install the NDIS driver: 1.

1. CardWizard will detect the insertion of the 802.11a CardBus card and show the following

screen. Click Correct to Continue.