User Manual

51
Prophet X User’s Guide
Low Frequency Oscillators
Square RandomSawtooth Reverse
Sawtooth
Triangle
0
LFO waveshapes
The LFOs can be free-running or synced to the arpeggiator, sequencer, or
MIDI clock for tempo-synced effects such as lter sweeps, tremolo, and so on.
LFO Parameters (Front Panel)
Frequency: Sets the frequency of the selected LFO from a slow .022Hz
to a fast 500Hz. This is affected by the clk sync (clock sync) parameter
as explained below.
Amount: Sets the amount of LFO modulation routed to the selected
destination. Setting an amount here applies the selected modulation
continuously. You can also use the modulation matrix to route an LFO
to additional destinations and use a different modulation amount if you
want.
Shape: Triangle, Sawtooth, Reverse Sawtooth, Square, Random—This
button sets the waveshape of the selected LFO.