Reference Guide

62 Client Configuration Toolkit Options
--optimus
--ovrwrt
--ownerpwd
optionalhddfan=install
Valid Argument enable, disable
Description Enables or disables the Optimus feature. If enabled, the feature
automatically turns off the power of the Graphics Processing Unit
(GPU) when not required and turns it on when required.
Example C:\>cctk --optimus=enable
optimus=enable
Valid Argument Read-only
Description This option is only used with the -o option to cause the output file
to be overwritten if a file of the same name already exists.
Example C:\>cctk -o=filename.ini --ovrwrt
The file filename has been overwritten.
Valid Argument <password>
Description Sets, changes, or removes the owner password. The system cannot
report the owner password. The owner password is designed for
companies that loan or lease systems. It allows the leasing agency
(the owner of the system) to remove any administrator, system, or
hard drive passwords that is set on the system by the lessee.
NOTE: Reboot the system to complete any owner password actions.
Example To set the password:
C:\>cctk --ownerpwd=<new-password>
You can set the owner password if the lower priority passwords
(administrator, system, or hard drive passwords) are not set.
NOTE: If owner password is set on a system, set the system or
administrator password for configuring the BIOS options on the
system.