CLI Guide

281 lacp 4673536 266240 221060 0 221060 221060
277 ipm1 4837376 380928 83788 0 83788 83788
273 acl 5005312 512000 239564 149076 123616 90488
272 topoDPC 117927936 0 0 0 0 0
271 bcmNHOP 117927936 0 0 0 0 0
270 bcmDISC 117927936 0 0 0 0 0
269 bcmATP-RX 117927936 0 0 0 0 0
268 bcmATP-TX 117927936 0 0 0 0 0
267 bcmSTACK 117927936 0 0 0 0 0
266 bcmRX 117927936 0 0 0 0 0
265 bcmLINK.0 117927936 0 0 0 0 0
!----------- output truncated --------------!
Dell#
show software ifm
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb
interface | stack-unit unit-ID | trace-flags}
Parameters
clients Enter the keyword clients to display IFM client
information.
summary (OPTIONAL) Enter the keyword summary to display brief
information about IFM clients.
ifagt number Enter the keyword ifagt then the number of an interface
agent to display software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb then one of the following interface
IDs then the interface information to display interface
control block information for that interface:
• For a 1-GigabitEthernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
stack-unit unit-ID Enter the keyword stack-unit then the stack member
number to display IFM information for that unit.
trace-flags Enter the keyword trace-flags to display IFM information
for internal trace flags.
Defaults None.
Command Modes
• EXEC
• EXEC Privilege
Control and Monitoring
163