Command Line Reference Guide

rmon event
Add an event in the RMON event table.
S5000
Syntax
rmon event number [log] [trap community] [description string]
[owner name]
To disable RMON on an interface, use the no rmon event number [log] [trap
community] [description string] command.
Parameters
number Assign an event number in integer format from 1 to 65535. The number
value must be unique in the RMON event table.
log (OPTIONAL) Enter the keyword log to generate an RMON log entry.
The log entry is triggered and sets the eventType in the RMON MIB to
log or log-and-trap. The default is No log.
trap community (OPTIONAL) Enter the keyword trap followed by an SNMP
community string to configure the eventType setting in the RMON
MIB. This sets either snmp-trap or log-and-trap. The default is
public.
description string (OPTIONAL) Enter the keyword description followed by a string
describing the event.
owner name (OPTIONAL) Enter the keyword owner followed by the name of the
owner of this event.
Defaults As noted above.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
rmon hc-alarm
Set an alarm on any MIB object.
S5000
Syntax
rmon hc-alarm number variable interval {delta | absolute}
rising-threshold value event-number falling-threshold value
event-number [owner string]
To disable the alarm, use the no rmon hc-alarm number command.
Parameters
number Enter the alarm integer number from 1 to 65535. The value must be
unique in the RMON alarm table.
1100