Command Line Reference Guide

Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show ip bgp next-hop command shown in the Example
below.
Field Description
Next-hop Displays the next-hop IP address.
Via Displays the IP address and interface used to reach the next hop.
RefCount Displays the number of BGP routes using this next hop.
Cost Displays the cost associated with using this next hop.
Flaps Displays the number of times the next hop has flapped.
Time Elapsed Displays the time elapsed since the next hop was learned. If the route
is down, this field displays time elapsed since the route went down.
Example
FTOS>show ip bgp next-hop
Next-hop Via RefCount Cost Flaps Time
Elapsed
63.114.8.33 63.114.8.33, Te 12/22 240984 0 0 00:18:25
63.114.8.34 63.114.8.34, Te 12/22 135152 0 0 00:18:13
63.114.8.35 63.114.8.35, Te 12/22 1 0 0 00:18:07
63.114.8.60 63.114.8.60, Te 12/22 135155 0 0 00:18:11
FTOS>
show ip bgp paths
View all the BGP path attributes in the BGP database.
S5000
Syntax
show ip bgp paths [regexp regular-expression]
Parameters
regexp regular-
expression
Enter a regular expression then use one or a combination of the
following characters to match:
• . = (period) any single character (including a white space).
• * = (asterisk) the sequences in a pattern (0 or more
sequences).
• + = (plus) the sequences in a pattern (1 or more sequences).
• ? = (question mark) sequences in a pattern (either 0 or 1
sequences).
325