Reference Guide

Error Code Message
54 ERROR IN DIAGNOSTIC FUNCTION
RACADM Utility Error Codes And Messages
Table below lists RACADM utility error codes and messages.
Table 45. RACADM Error Codes and Messages
Error Code Message
513 An unknown failure occurred.
514 Librac library not initialized.
515 An invalid parameter was passed into function.
516 Invalid DRSTYPE specified.
517 Librac library already initialized.
518 Invalid transport type specified.
519 Invalid library user.
520 A connection to the RAC controller could not be established.
521 Failed to perform read operation with RAC controller.
522 Failed to perform write operation with RAC controller.
523 Invalid message ID.
524 Invalid message type.
525 Invalid response message.
526 Specified user buffer is too small to hold data.
527 Authentication failed - Invalid user name or password.
528 Invalid CHAP protocol response encountered.
529 CHAP buffer too small.
530 Timeout occurred.
531 Insufficient user privileges to perform operation.
532 TFTP write error encountered.
533 TFTP read error encountered.
534 TFTP local file write error encountered.
535 TFTP local file read error encountered.
536 TFTP write request failed.
537 TFTP read request failed.
212