Command Line Interface Guide

omconfig storage Commands 273
omconfig Global Enable Smart Thermal Shutdown
By default, the operating system and server shut down when the PV220S and
PV221S enclosures reach a critical temperature of 0 or 50 degree Celsius.
However, if you have implemented
connector redundancy on the PV220S and
PV221S enclosures you can specify that only the enclosure and not the
operating system and server are shut down when the enclosure reaches a
critical temperature of 0 or 50 degree Celsius. Specifying that only the
enclosure is shut down during excessive temperatures is known as Smart
Thermal Shutdown. See the Dell OpenManage Online Help for more
information about Smart Thermal Shutdown.
Use the following omconfig command syntax to enable smart thermal
shutdown.
Complete Syntax
omconfig storage globalinfo action=enablests
Table 8-12. omconfig Global Commands
Required Command Levels (1, 2, 3) Optional name=value pairs
omconfig storage globalinfo
action=enablests
action=disablests
action=globalrescan
action=setprotectionpolicies type=ghs or dhs