Command Line Interface Guide

66 omreport: Viewing System Status Using the Instrumentation Service
Adapter refers to the name and/or type of the card that fits into the slot, for
example, a storage array controller, SCSI adapter, iDRAC Enterprise, or HBA.
Data Bus Width is the width, in bits, of the information pathway between
the components of a system. The range of the data bus width is from 16 to 64
bits.
omreport chassis temps or omreport mainsystem temps
Use the omreport chassis temps or omreport mainsystem temps command to
view properties of the system’s temperature probes. Type:
omreport chassis temps index=n
or
omreport mainsystem temps index=n
The index parameter is optional. If you do not specify the index, Server
Administrator displays a summary of status, readings, and thresholds set for
any temperature probes that is present on the system. If you specify the index,
Server Administrator displays a summary for a specific temperature probe.
omreport chassis volts or omreport mainsystem volts
Use the omreport chassis volts or omreport mainsystem volts command to
view properties of the system’s voltage probes. Type:
omreport chassis volts index=n
or
omreport mainsystem volts index=n
The index parameter is optional. If you do not specify the index, Server
Administrator displays a summary of status, readings, and thresholds set for
any voltage probes that is present on the system. If you specify the index,
Server Administrator displays a summary for a specific voltage probe.
omreport system Commands or omreport
servermodule Commands
Use the omreport system or omreport servermodule commands to view logs,
threshold values, cost of ownership information, and information about how
shutdown actions and recovery actions are configured.