Command Line Interface Guide

74 omreport: Viewing System Status Using the Instrumentation Service
omreport system operatingsystem or omreport servermodule
operatingsystem
Use the omreport system operatingsystem or omreport servermodule
operatingsystem command to display information about the operating
system.
omreport system pedestinations or omreport servermodule
pedestinations
Use the omreport system pedestinations or omreport servermodule
pedestinations command to view destinations where alerts are sent for
platform events. Depending on the number of destinations displayed,
configure a separate IP address for each destination address.
Ty p e :
omreport system pedestinations
or
omreport servermodule pedestinations
The output of the omreport system pedestinations or omreport
servermodule pedestinations command lists each of the valid parameters.
NOTE: To maintain consistency across the commands, the output format of this
command has changed. Change the user scripts as applicable.
NOTE: The actual number of destinations you can configure on the system may
differ. Table 3-8 shows the available settings.
Table 3-8. Settings for the omreport system pedestinations or omreport servermodule
pedestinations
Output Attributes Description
Destination List
Destination Number:
Destination1
destination 1: Displays the first
destination.
Example:
101.102.103.104: IPv4 address of the
first destination.