Command Line Interface Guide

3
omreport: Viewing System Status Using The
Instrumentation Service
The omreport command allows you to see detailed information about the system components. You can also retrieve
summaries for many system components at one time, or get details about a specific component. This chapter shows you
how to get reports with the level of detail that you want.
Commands documented in this chapter vary in whether they define the fields that appear in the results of a particular
omreport command. The fields are defined only if they have a special or less familiar use.
As with all other components, use omreport to view component status, and omconfig to manage a component. For
information on configuring components for management, see omconfig: Managing Components Using The
Instrumentation Service.
Use the omreport commands to get information you need to execute an omconfig command. For example, to edit the
minimum temperature for a warning event on a temperature probe, you must know the index of the probe you want to
configure. Use omreport chassis temps to display a list of probes and their indexes.
The omreport commands available on the system depend on the system configuration. The following table lists the
systems on which the omreport commands are applicable:
Table 3. System Availability For The omreport Command
Command Level
1
Command Level 2 Applicable To
omreport modularenclosure Blade systems
servermodule Blade systems
mainsystem Blade systems
system Rack and Tower systems
chassis Rack and Tower systems
preferences Blade or Rack, and Tower systems
Conventions For Parameter Tables
When listing the parameters that a command can take, the parameters are listed in alphabetical order instead of the
order in which they appear in the command line interface.
The symbol |, often called pipe , is the logical exclusive or operator. For example, enable | disable means you can enable
or disable the component or feature, but you cannot simultaneously enable and disable the component or feature.
Command Summary Of The omreport Command
Depending on the system configuration, the results of the omreport command vary from one system to another. Data
displays for installed components only.
19