User Manual

4
DigiGrid M
INTRODUCTION
Thank you for choosing this DiGiGrid Desktop interface for SoundGrid systems. In order to get the most out of your product,
please take some time to read this manual. We also suggest that you become familiar with our support sites, www.digigrid.net and
www.waves.com/support, where you will nd an extensive answer base, the latest tech specs, detailed installation guides, software
updates, and current information about licensing and registration.
DiGiGrid M is a SoundGrid interface designed especially for musicians
This is an easy-to-use, plug-and-play interface that’s ideally suited for music settings. M’s top-quality converters and mic preamps
provide audio capture of the highest order. There are two inputs. One is a dedicated mic/line input; the other is for instrument/line
sources. A dedicated high-power headphone output produces a classic warm analogue control path. The unit has a non-slip base.
M is powered by a twist-lock 12V DC power supply (provided as standard). When a DiGiGrid S network switch is part of the
SoundGrid network, the M interface does not need external power. It’s instead powered through Power over Ethernet (PoE).
The DiGiGrid S also enables networking up to four DiGiGrid devices, separated by as much 75 meters.
M is part of a SoundGrid network, so as your needs grow, you can connect extra I/Os and DSP from the rack-mounted DiGiGrid
series. With a simple Ethernet connection to your Mac or PC running any DAW, you have a simple stand-alone, high-quality audio
interface. The M interface can even be connected to multiple computers and DAWs at the same time.
DiGiGrid S provides power over Ethernet for DiGiGrid D, M, Q interfaces.
This switch enables D, M, and Q interfaces to operate without external power sources. It features one upstream (non-PoE)
port, and four downstream PoE ports, which allows connection to four further DiGiGrid devices. The DiGiGrid S is the perfect
complement to your growing networked audio system, both now and in the future.