- EXP ThinCom PCMCIA Ethernet Modem Adapter

APPENDIX AAPPENDIX A
- 24 -
&Q5, &Q6 Asynchronous escape.
&Q2, &Q3 The modem hangs up.
&D2 Interpret DTR ON-to-OFF transition per &Qn:
&Q0 thru &Q6 The modem hangs up.
&D3 Interpret DTR ON-to-OFF transition per &Qn:.
&Q0, &Q1, &Q4,.
&Q5, &Q6 The modem performs soft reset.
&Q2, &Q3 The modem hangs up.
&F0 Restore factory configuration 0.
&F1 Restore factory configuration1.
&G0 Disable guard tone.
&G1 Disable guard tone.
&G2 Enable 1800 Hz guard tone.
&J0 Set S-Register response only for compatibility.
&J1 Set S-Register response only for compatibility.
&K0 Disable DTE/DCE flow control.
&K3 Enable RTS/CTS DTE/DCE flow control.
&K4 Enable XON/XOFF DTE/DCE flow control.
&K5 Enable transparent XON/XOFF flow control.
&K6 Enable both RTS/CTS and XON/XOFF flow control.
&L0 Select dial up line operation.
&L1 Select leased line operation.
&M0 Select direct asynchronous mode.
&M1 Select sync connect with async off-line command mode.*
&M2 Select sync connect with async off-line command mode and enable DTR dialing of directory zero.*
&M3 Select sync connect with async off-line command mode and enable DTR to act as Talk/Data switch.*
&P0 Set 10 pps pulse dial with 39%/61% make/break.
&P1 Set 10 pps pulse dial with 33%/67% make/break.
&P2 Set 20 pps pulse dial with 39%/61% make/break.
&P3 Set 20 pps pulse dial with 33%/67% make/break.
&Q0 Select direct asynchronous mode.
&Q1 Select sync connect with async off-line command mode.*
&Q2 Select sync connect with async off-line command mode and enable DTR dialing of directory zero.*
&Q3 Select sync connect with async off-line command mode and enable DTR to act as Talk/Data switch.*
&Q4 Select Hayes AutoSync mode.