User Manual

For answers to your GE Profile
™
Series or GE Appliances product questions, visit our
website at geappliances.com or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 6/20
DIMENSIONS AND INSTALLATION INFORMATION
JTD5000DN/BN/EN/FN/SN
GE
®
30" Smart Built-In Self-Clean Convection
Double Wall Oven with Never Scrub Racks
NOTE: 30” Double electric wall ovens are approved for
installation above 27” and 30” warming drawers.
ATTENTION INSTALLER: Electric wall ovens are NOT
approved for installation with a plug and receptacle. They
must be hard wired into an approved junction box.
IMPORTANT: Before installing, consult installation
instructions packed with ALL products for current
dimensional and combination data.
WHEN TO USE THE PEDESTAL RAILS: When
replacing an older GE Appliances 30" double wall oven with
a new GE Appliances model. Cutout Height = 51-13/16" to
51-15/16". This is our traditional cutout height.
WHEN NOT TO USE THE PEDESTAL RAILS:
When replacing a 30" double wall oven from another
manufacturer (ie; Whirlpool) with a new GE Appliances
model. Cutout height = 50-1/4". You will need to verify that
the existing cutout matches the 50-1/4" dimension.
If the new GE Appliances 30" double wall oven is being
installed into new construction (ie; not a replacement), then
the recommended installation is to use the pedestal rails.
Flanges toward
center of cutout
Top cutout
toward front
Attachment
screws