Installation Guide of the IOT Macro Gateway V0.1 WSMS-123 Installation Guide IOT Macro Gateway (Date: 8/24/2016) Gemtek Technology Co., Ltd. Confidential information This document contains confidential and/or proprietary information of Gemtek Technology Co., Ltd. and shall not be, directly or indirectly, reproduced or copied in any manner without the written consent of Gemtek Technology Co., Ltd. Gemtek Technology Co., Ltd.
Installation Guide of the IOT Macro Gateway V0.1 Revision History: Date/Version 08/24/2016 v0.1 Editor Cory Lam Remark Initial draft Abbreviation: Gemtek Technology Co., Ltd.
Installation Guide of the IOT Macro Gateway V0.1 Outline: 1 2 3 4 5 Application ............................................................................................................. 4 Product Overview .................................................................................................. 5 2.1 Enclosure Features ........................................................................................... 6 2.2 Power-Over-Ethernet (PoE) ..................................................
Installation Guide of the IOT Macro Gateway V0.1 1 Application This document is to describe the installation procedure and application of the IOT Macro Gateway. Project Code : WSMS-123 Gemtek Technology Co., Ltd.
Installation Guide of the IOT Macro Gateway V0.1 2 Product Overview The IOT Macro Gateway is one of many gateways in our wireless IOT solution. Each IOT Macro Gateway can listen and receive LoRa packets on 64 channels concurrently. It can supports tens of thousands of our IOT nodes. Our nodes can be sensor nodes, meter nodes and trackers. They send packets to the IOT Macro Gateways covering the area, which in turn send the data to the cloud server where data can be analyze and used for billing purpose.
Installation Guide of the IOT Macro Gateway V0.1 2.1 Enclosure Features The IOT Macro Gateway is designed to be mounted on a mounting pole. It comes with mount kit as shown here: Gemtek Technology Co., Ltd.
Installation Guide of the IOT Macro Gateway V0.1 The IOT Macro Gateway can also be mounted on a wall. It comes with mount kit as shown here: Gemtek Technology Co., Ltd.
Installation Guide of the IOT Macro Gateway V0.1 2.2 Power-Over-Ethernet (PoE) A CAT5 PoE interface is used to split the Data and Power carried by a CAT5 cable to the internal equipment. To supply the required current to the equipment, the PoE adapter should be used. Gemtek Technology Co., Ltd.
Installation Guide of the IOT Macro Gateway V0.1 3 Installation 3.1 Professional Installation The IOT Macro Gateway, and any associated accessories require professional installation; a) installation of the equipment must be controlled, b) installation must be performed by professionals, c) installation of the equipment requires special training. 3.2 Mounting As described earlier, the IOT Macro Gateway comes with a mount kit for mounting on a pole.
Installation Guide of the IOT Macro Gateway Gemtek Technology Co., Ltd. In Commercial Confidential V0.
Installation Guide of the IOT Macro Gateway V0.1 3.4 LED Indicators None 4 Antenna Parameters This device has been tested with the antenna listed below, and has a peak gain of 7.2 dBi. The required antenna impedance is 50 ohms. Table 1 Typical Antenna Manufacturer Auden Part Number O-UF-1602-OA Gain 7.2dBi Type Dipole Additional equivalent antennas from other manufactures may be substituted and then marketed with this equipment. Equivalent antennas must be of the same type (e.g.
Installation Guide of the IOT Macro Gateway V0.1 5 Appendix FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Installation Guide of the IOT Macro Gateway V0.1 Professional installation instruction Please be advised that due to the unique function supplied by this product, the device is intended for use with our interactive entertainment software and licensed third-party only. The product will be distributed through controlled distribution channel and installed by trained professional and will not be sold directly to the general public through retail store. 1.
