HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

MESSAGE CODE
0x0270006
TYPE
CPG growth limit
MESSAGE 1
CPG <cpg name> <SD and/or user space> has reached allocation <limit>
of <XX>G.
SUGGESTED ACTION
The logical capacity reserved and in use by the named CPG is above the configured allocation
limit. New writes on TPVVs and/or Snapshot Volumes mapped to this CPG will result in write
failures. To allow the named CPG to continue to auto-grow the logical capacity, reset its Allocation
Limit’ to a higher number. Also, check that sufficient capacity is available to accommodate CPG
auto-LD creation. This can be verified by executing the showspace command with the -cpg
<cpg name> option, which will take into account the specific LD characteristics associated with
the CPG when determining the available capacity. If effective available capacity is running low,
contact your service provider to purchase and install additional capacity.
MESSAGE 2
CPG <cpg name> <SA> space has reached allocation <limit> of <XX>G.
SUGGESTED ACTION
The logical capacity reserved and in use by the named CPG is above the configured allocation
limit. New writes on TPVVs and/or Snapshot Volumes mapped to this CPG will result in write
failures. To allow the named CPG to continue to auto-grow the logical capacity, reset its Allocation
Limit’ to a higher number. Also, check that sufficient capacity is available to accommodate CPG
auto-LD creation. This can be verified by executing the showspace command with the -cpg
<cpg name> option, which will take into account the specific LD characteristics associated with
the CPG when determining the available capacity. If effective available capacity is running low,
contact your service provider to purchase and install additional capacity.
NOTE: There are times when a single allocation results in both the warning and the limit being
hit at the same time. In this case, only the most severe alert is posted, the limit. For example, if you
create a single VV that takes you from <50% used, to >95% used, only the 95% used alert is
generated.
242 Alerts