HP 3PAR Solaris Implementation Guide

/scsi_vhci/ssd@g50002ac007f100af
4. c5t5000c5000AC007F200AFd0 <3PARdata-VV-0000 cyl 4309 alt 2 hd 8 sec 304>
/scsi_vhci/ssd@g50002ac007f200af
5. c5t5000c5000AC007F300AFd0 <3PARdata-VV-0000 cyl 4309 alt 2 hd 8 sec 304>
/scsi_vhci/ssd@g50002ac007f300af
6. c5t5000c5000AC007F400AFd0 <3PARdata-VV-0000 cyl 4309 alt 2 hd 8 sec 304>
/scsi_vhci/ssd@g50002ac007f400af
7. c5t5000c5000AC007F500AFd0 <drive not available>
/scsi_vhci/ssd@g50002ac007f500af
8. c5t5000c5000AC007F600AFd0 <3PARdata-VV-0000 cyl 4309 alt 2 hd 8 sec 304>
/scsi_vhci/ssd@g50002ac007f600af
9. c5t5000c5000AC007F700AFd0 <3PARdata-VV-0000 cyl 4309 alt 2 hd 8 sec 304>
/scsi_vhci/ssd@g50002ac007f700af
10. c5t5000c5000AC007F800AFd0 <3PARdata-VV-0000 cyl 4309 alt 2 hd 8 sec 304>
/scsi_vhci/ssd@g50002ac007f800af
11. c5t5000c5000AC007F900AFd0 <3PARdata-VV-0000 cyl 4309 alt 2 hd 8 sec 304>
/scsi_vhci/ssd@g50002ac007f900af
12. c5t5000c5000AC007F900AFd0 <3PARdata-VV-0000 cyl 4309 alt 2 hd 8 sec 304>
/scsi_vhci/ssd@g50002ac007fa00af
Specify disk (enter its number)
iSCSI does not support removal of the last available path to the device if any iSCSI LUNs are
in use (such as in a mounted file system or where associated I/O is being performed) and
generates a “logical unit in use” error.
Example: There are two paths to the device having a mounted file system.
# iscsiadm list discovery-address
Discovery Address: 11.1.0.110:3260
Discovery Address: 10.1.0.110:3260
# iscsiadm remove discovery-address 11.1.0.110:3260
# iscsiadm remove discovery-address 10.1.0.110:3260
iscsiadm: logical unit in use
iscsiadm: Unable to complete operation
CAUTION: A reboot -r should be performed on the host to properly clean the system
after a VLUN has been removed.
60 Allocating Storage for Access by the Solaris Host