Distributed Systems Administration Utilities User's Guide, Linux, March 2009

synchronization service to groups of remote client systems. Those clients can be standalone
systems or Serviceguard clusters. The cluster providing the cfengine service can be a client of
itself and also take advantage of cfengine’s configuration synchronization features. A possible
but somewhat unusual configuration is to have a fixed member of a Serviceguard cluster act as
the master server but no package is configured so cfservd will not be highly available. This
configuration is valid but not recommended.
2.3 Configuring cfengine
The following sections provide detailed instructions for setting up a configuration synchronization
master server and its clients. The quickest way to get started is to use the Configuration
Synchronization Wizard (csync_wizard), described in the next section. Completely manual
configurations are also described.
2.3.1 Using the Configuration Synchronization Wizard
The csync_wizard (see csync_wizard(1)) automates the task of setting a configuration
synchronization master server and its managed clients. It supports setting up a standalone system
or a Serviceguard cluster as the master server. The wizard configures all managed clients to run
a cfservd so that cfrun (see cfrun(8)) can be used on the master server.
With the csync_wizard, you perform the following tasks:
• Set up a master server
• Add a client
• Remove a client
• Manage keys for cfengine clients
• Display the current configuration
See the appropriate sections below for details. Table 2-1 lists the information you will need to
gather before running the csync_wizard to set up the master server.
When running the wizard on a Serviceguard cluster, the default is to set up cfengine as a highly
available service (Serviceguard package). The administrator must provision the storage
environment for the package and the required package IP address and DNS name registration.
The wizard supports LVM storage configurations. Non-LVM configurations must be completed
manually. The package information that the wizard requires is given in Table 2-1.
Table 2-1 Configuration Data for csync_wizard
Your ValueExampleConfiguration Data
/dev/vgcsync
LVM volume group
/dev/vcgsync/lvol1
Logical volume
/csync
Filesystem mount point
-o rw
Mount options
ext3
Filesystem type
192.10.25.12
Package IP Address (a registered DNS
name)
192.10.25.0
Package subnet
20 Configuration Synchronization