TR3271 Management Programming Manual

COMMANDS AND RESPONSES
ALTER Command
ZTR3-ERR-ALRDY-USING-ADDR (6)
Your management application attempted to alter the address of
a subdevice, but the address specified in ZADDR is already in
use by another subdevice. The ZADDR field must have a value
not previously assigned.
ZTR3-ERR-ATTR-CONFL-SU (4)
An SU attribute conflicts with a LINE attribute. The ZXPARENT
field for an SU is defined as ZSPI-VAL-TRUE, but the LINE
attributes defined by the ZCHARSET, ZCTL-SET, ZXLATE, and
ZXPARENT fields are not properly specified.
ZSPI-TKN-ENDLIST indicates the end of a data list or an error
list. This token is described in "SPI Standard Definitions"
in Section 5 and the Distributed Systems Management (DSM)
Programming Manual .
Operational Notes
• ALTER is a sensitive command.
• When the command is completed, the line and subdevice remain
in the same state as they were before the command was
executed.
• The LINE and SU objects must be in the STOPPED summary state
before their attributes can be altered, except when changing
the DEBUG attribute in the token ZTR3-MAP-ALTER-LINE.
• To obtain attributes values of a line or subdevice, use the
INFO command.
6-30