HP Remote Graphics Software 5.4.0 User Guide

property is true, the user is allowed to interactively change the associated property, that is, the
Rgreceiver.Network.Timeout.Error property.
NOTE: For clarity, the individual IsMutable properties are not shown in the previous list; however,
they are included in the following detailed description of each property.
NOTE: In order for the user to be able to interactively change a property, the group IsMutable
property and the individual IsMutable property must both be 1 (true). If either IsMutable property is 0
(false), the user will not be able to interactively change the associated property.
In Figure 8-2 The Receiver timeout error IsMutable property is set to 0 on page 159, the Receiver is
started with the command line option –Rgreceiver.Network.Timeout.Error.IsMutable=0, which prevents
the user from changing the value of the network timeout error property.
Figure 8-2 The Receiver timeout error IsMutable property is set to 0
Because the Receiver timeout error property IsMutable property is 0, the Receiver timeout error property
cannot be changed by the user in the Receiver Control Panel (see
Figure 8-3 The Receiver timeout error
property menu is grayed out on page 159).
Figure 8-3 The Receiver timeout error property menu is grayed out
8.5.3 Receiver general properties
The general properties are listed below. After each property, the default value is listed in parenthesis.
ENWW
RGS Receiver properties
159