HP Systems Insight Manager 5.3 Command Line Interface reference guide

An MRO provides the information required to access an agent (MAO). An MRO always has an associated
MAO included in its overall information. An MRO on a node points to an MAO residing on the same node,
or another node.
The following sample XML list shows a node with one MAO and one MRO residing on the node. A node's
MPOs are included in the XML within the <managementpath-list> block. Within this list block, each
MPO is included in its own <managementpath> block, where an mpotype attribute defines an MRO, MPO,
or MAO type. The MRO in the following sample has an associated MAO that resides on another system.
Adding, modifying, or removing MPO data for a node is available only through the mxnode CLI modify
option which requires the MPO data to be provided via XML input. See the mxnode(4) manpage for more
information about using an XML file to add or modify a node's MPO data.
<node-list>
<node name="abc" guid="..." host-name="..." monitoring="resume">
<hw-attribute name="DeviceType">Server</hw-attribute>
<sw-attribute name="PreferredNodeName">abc</sw-attribute>
<sw-attribute name="OverallStatus">NORMAL</sw-attribute>
<sw-attribute name="IPAddress">nn.nn.nnn.nn</sw-attribute>
<sw-attribute name="ProtocolSupport">WBEM:1.0</sw-attribute>
<sw-attribute name="ProtocolSupport">SNMP:1.0</sw-attribute>
<sw-attribute name="discovery.source">Ping</sw-attribute>
<sw-attribute name="DefaultProtoSettings">true</sw-attribute>
<sw-attribute name="DefaultAttributeSettings">true</sw-attribute>
<sw-attribute name="DefaultSystemName">true</sw-attribute>
<managementpath-list totalmpos="2">
<managementpath mpotype="MAO" mpoversion="1.0" maotype="WBEM_CIMOM"
location="OnThisNode">
<nodeguid>nn...nn</nodeguid>
<nodename>abc</nodename>
<proxytype>WBEM_CIMOM</proxytype>
<portnumber>nnnn</portnumber>
<ipaddress>nn.nn.nnn.nn</ipaddress>
<protocol>https</protocol>
<maoluid>nnnnnnnnnnn</maoluid>
<interopnamespace>interop</interopnamespace>
<profilelist>
<profilename>Array</profilename>
<profilename>Server</profilename>
</profilelist>
<functionalprofilelist>
<profilename>Basic Read</profilename>
<profilename>Basic Write</profilename>
</functionalprofilelist>
</managementpath>
<managementpath mpotype="MRO" mpoversion="1.0">
<catagoryname>hpmxCimomMro</categoryname>
<mroluid>nnnnnnnnnnn</mroluid>
<profilelist>
<profilename>Switch</profilename>
Example 7 61