HP Systems Insight Manager 5.2 Update 2 Technical Reference Guide

10. Select Bring systems to full power before install if you want to bring systems to full power before
the installation. If this option is not selected, the installation is attempted and might fail because the
system was not running at full power.
Note: The targeted system must support Magic Pocket technology to be brought to full power.
If selected, the target systems are brought to full power before the install is selected.
11. (Optional) Clear the Reboot systems if necessary after successful install option if you do not want
to reboot after the installation. However, the successful task status indicates that a reboot is required to
complete the update.
12. Click Run Now to update the software. This process may take several seconds. The Task Results page
appears indicating whether the updates succeeded or failed.
Related procedure
• Installing Software and Firmware
• HP Version Control Agent reports
Related topic
▲ Version Control
Initial ProLiant Support Pack Install
The Initial HP ProLiant Support Pack Install task enables you to install an HP ProLiant Support Pack from a
Windows Central Management Server (CMS) to a Windows managed system when you do not have any
HP Insight Management Agents , especially the HP Version Control Agent , installed. This task also configures
the systems to use the trust certificate from HP Systems Insight Manager (HP SIM) and the setting to use the
desired HP Version Control Repository Manager (VCRM).
NOTE: The Initial HP ProLiant Support Pack Install feature is only supported on Windows Central
Management Servers.
The target system must be a Windows system. The Install Software and Firmware feature in HP SIM requires
that the HP Version Control Repository Manager (VCRM) be installed and populated on servers containing
a repository. Installing the VCRM is not part of this procedure. For more information regarding installing the
VCRM, see the HP Version Control Installation Guide at http://h18013.www1.hp.com/products/servers/
management/agents/documentation.html.
You can use the Configure or Repair Agents task to setup managed systems simultaneously which also installs
the VCA from Windows CMSs to Windows managed systems. For more information, see see “Windows
CMS”.
NOTE: You must have Windows administrator privileges on target systems to install a HP ProLiant Support
Pack.
NOTE: The Install Software and Firmware and HP Version Control Agent (VCA) tasks are only available
to systems running a properly configured VCA. Running the Initial HP ProLiant Support Pack task enables
you to install the VCA quickly and easily.
NOTE: For more information regarding HP ProLiant Support Packs, see the HP ProLiant Support Pack and
Deployment Utilities User Guide at http://www.hp.com/servers/psp.
NOTE: More than one Initial HP ProLiant Support Pack Install tasks cannot be run simultaneously. If you
execute a second task before the first one is complete, the second task starts after the first task completes.
To install a HP ProLiant Support Pack:
1. Select Deploy→Deploy Drivers, Firmware and Agents→Initial HP ProLiant Support Pack Install.
The Initial ProLiant Support Pack Install page appears.
2. Add multiple or single targets:
466 Tools that extend management