HDLC-Frame Protocol User's Guide (February 2004)

Protocol Specific Configuration
Introduction
Chapter 428
Introduction
This chapter provides specific information on preparing the network
configuration file when HDLC.FRAME is to be used.
The parts of the network configuration file relevant to HDLC.FRAME
are:
• Interface definitions
• Port definitions
• Terminal definitions
Interface Definitions
Any card with HDLC.FRAME terminals configured, must have an
interface definition line in the network configuration file. This serves to
associate a card (or mux) number with the physical location of the card in
the machine, and also specifies the firmware to be downloaded (one file
only) to the card when it is started up.
A few sample interface definitions are as follows:
Z7340A 00 0:4 /opt/acc/z7340a/loopback.zabs